ERYONE PLA Filament 1.75mm for 3D Printing - 1KG (2.2LBS) Spool, ±0.03mm Precision, Vibrant Blue - Perfect for DIY Projects, Prototyping & Home Decor

I just recently started using ERYONE Brand Filament, but thought I would give it a try since it was decently priced and they had some unique colors that were not available from any other filament line. I was a little hesitant at first as I hadn't heard of the brand before, but after going through several rolls of filament in the last few weeks I have to say I am quite impressed.After drying the filament for 2 hours at 50 degrees Celsius, which is my usual standard practice for all PLA filament, I printed this dragon fly with a 4mm nozzle on my Bambu X1C in under 4 hours and it came out perfect with zero stringing, great layer adhesion and a consistent flow rate that gave the model a very uniform appearance without any signs of deviance in layer height.I also noticed that this filament works well with every other filament brand I used it with which is something I have had an issue with several filament brands lately. So when using the exact same filament type you should be able to use different brands with no or little issues in layer adhesion or shrinkage, but I have found several brands lately where PLA, PLA Plus and PLA Tough don't want to adhere and end up separating after printing. Fortunately I didn't see any of these issues when using ERYONE PLA Filament with Bambu, Overature or Polymaker and over all the filament worked perfectly with every filament brand I tried which is a great plus for me as we keep an extensive catalogue of unique colors and ERYONE's Blue Burnt Titanium is one of our favorites, so knowing that it will work with all of the other filament brands we use is a huge plus since it means we don't have to keep extra base colors around and a list of which filament brands work, things will just work and we can spend less time having to worry about filament compatibility and more time on making prints.Overall, this filament is fabulous with a great price per gram and fantastic inter compatibilityratingI want to note that a lot of people have given this filament a 1 to 3 star review noting bad layer adhesion or bad bed adhesion. This is usually caused by the filament not being dried before use. Now, I have gone through 4 rolls of the ERYONE filament so far and that includes two rolls of the burnt titanium and 2 rolls of red PLA-CF, and as long as the filament has been dried properly I have never had a single issue with this filament. In fact I would say it's in my top 5 filament brands and we have used and tested about 15 different filament brands over the last two years. If you want to really improve your prints take the time to dry your filament, it makes a huge difference. Secondly I would recommend that if people are using a filament for the first time that they also take the time to print a temp tower and a retraction tower to make sure that they have a good idea of the capabilities of that particular filament. Dialing in your printer is simply not good enough, you need to make sure you dial in your filament. Once you have dialed in your printer and your filament you will end up having a much more enjoyable experience and enjoy much finer quality prints.