PEI Sheet Spring Steel Plate - Textured & Smooth 2 Sided for Voron V2.4 3D Printer (355x355mm) - Perfect for ABS, PLA, PETG Printing & Easy Bed Adhesion

Specification: Item Type: PEI Sheet Material: Steel Color: Black steel plate Product Size: Approx. 355 x 355mm / 13.98 x 13.98in Applicable Machine: For Voron 350 V2, for Voron V2.4 Print Reference Temperature: 1.PLA: (both sides are fine) Hot Bed: 50-60℃ Nozzle: 200-210℃ Hot bed 60℃, nozzle 210℃ 2. ABS (powder surface is recommended. After temperature exceeds 80℃, the smoothsurface is easy to foam) Hot Bed: 70-120℃ Nozzle: 240-250℃ 3. PETG: (both sides are fine) Hot Bed: 60-85℃ Nozzle: 230-245℃ 4. Carbon fiber (both sides are fine, very close to PLA, hardened steel is recommended for the nozzle) Hot Bed: 50-60℃ Nozzle: 200-220℃ 5. TPU: (both sides are fine) Hot Bed: 50-60℃ Nozzle: 200-220℃ Hot bed 60℃, nozzle 220℃ 6. Wood (both sides are fine, very close to PLA): Hot Bed: 50-60℃ Nozzle: 200-220℃ Package List:1 x PEI Sheet Note:1. The steel plate is an elastic steel plate, and the printing plate needs to be flat when used, and the magnetic attraction is strong, which can firmly adsorb the plate on the plate.2. The first layer sprinklers should not scratch the platform, otherwise the sprinklers will scratch the platform and wear out the sprinklers.3. When printing the first layer, the nozzle should not be too far away from the platform, otherwise it will not stick to the printing platform, and the gap between the nozzle and the steel plate should be about a piece of A4 paper.4. The model cooling fan cannot be turned on for the first layer printing, otherwise it will affect the adhesion of the first layer printing.5. Add a skirt when printing a model with a small contact surface.

SMOOTH AND POWDER 2 SIDES: The steel plate is double sided coating, one side is gold powder, the other side is smooth PEI, one steel plate can meet two printing requirements

BOTH SIDES CAN BE USED DIRECTLY: This double sided coated bed sheet is very easy to use, just put on your heating bed, both sides can be used directly

EASY TO ADHERE AND REMOVE: Size is 355x355mm, suitable for the same size building board. Easy to adhere to the printing surface, easy to remove the printed matter

SPRING STEEL MATERIAL: Steel PEI plates are made of good quality spring steel, so when you bend them slightly, they won't kink or warp, very flexible

EASILY FALL OFF: When the temperature of the heating bed reaches room temperature, the printed part will easily fall off the surface. If the print is still jammed, gently bending the plate will help remove, easy to use