Premium Borosilicate Glass Printer Bed 235x235x3.8mm - High-Temperature Resistant 3D Printer Build Plate for Creality Ender 3/3 Pro/3 V2/5/S1/S1 Pro - Perfect for Smooth First Layer Adhesion & Easy Print Removal in Home & Office 3D Printing

Welcome to DCSW 3D printer store,Hope you have a great shopping experience!Any questions,feel free to contact we customer service,we will help you within 24 hrs! Glass Print bed Advantages: Glass Print bed is a universal print surface for 3D Printing. Almost all types of filament will print toglass in one way or another. Just place the Glass Print bed on your print board and clip it in place!To print with PLA or ABS , lightly spray the surface of the glass with 3d printing special solid glue,then install the Glass Print bed with glass clip. This glass has been specially ordered and modified for use in 3D Printers. If you want to make your printing platform flat enough, ideal stuff is glass sheet. Borosilicate glass is rated for higher temperatures than normal sheet glass making it a better material for use as a heated bed. After cracking a few sheets of normal glass from rapidly cooling or heating, borosilicate glass will quell your frustrations. Features: 1.Resistant to thermal shock compared to regular glass. 2.Prepare a second plate and quickly switchplates when a model finishes printing. This significantly reduces printer idle time between prints. 3.Reduces warping, however platform has to be properly leveled as is the case with any platform on a 3D printer. Note: 1.The glass can be used normally at 520 degree temperature. 2.You need to adjust the Z axis limit switch up and down when installing. 3.Apply some 3d printing solid glue on the glass surface on before printing. 4. The Glass Print Bed's thickness of 4.0mm is within the normal range.

【Borosilicate Glass】Based on 100,000 experiment report,this material has Ultra-low thermal expansion,heat resistant and high temperature shock resistance,far better than tempered glass.So borosilicate glass is the best choice for 3d printer.

【Worked Perfectly】This Printer Glass bed is amazingly flat.Smooth flat surface improves the quality of your 3D printing, for consistent results.Thick 3.8mm glass plate will not warp or bend under heat.

【Easy to Clean】Just wash it off with water, clean with glass print bed cleaner, reapply a thin layer 3d printing solid glue and enjoy.No need extra clips because of its own material and thickness.It won't take up build area.

【High Quality】 Square printer glass are safe and easy to handle.All edges have a nice smooth round over and there are no chips or scratches.Fits for the Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5 and CR-6 SE, CR-20, CR-20 Pro，DISWAY01.

100% Sovol Genuine Brand New - Original packaging, premium quality.