High Precision Heated Bed Module with Auto Leveling Sensor Kit for Ender-3 3D Printer - Professional Design, Easy Installation & Perfect for ABS/PLA Printing

Feature:1. As the electronic component of the 3D printer, the sensor can accurately measure the inclination of the bed surface.2. The leveling sensor can be used with any kind of bed material, such as glass, wood, metal, etc.3. With a simple structure and high accuracy, the 3D printer accessories can bring convenient printing effect.4. With automatic leveling function, the sensor is easier to use and can improve efficiency.5. The diameter of brass nozzle include 0.2/0.3/0.4/0.5/0.6mm and the kit is suitable for Ender‑3/CR‑10 3D printer.Specification:Item Type: Automatic Leveling Sensor KitMaterial: PTFE+BrassModel: Ender-3/CR-10Purpose: Ender-3/CR-10 3D PrinterMK9 Brass Nozzle Diameter: 0.2/0.3/0.4/0.5/0.6mmApplicable Models: Ender-3/CR-10 3D PrinterPackage List:1 x Blue PTFE Tube1 x Automatic Leveling Sensor1 x Bracket2 x Pneumatic Connector1 x Burner2 x Plug-In4 x Screw1 x Connection Line1 x Adapter Board2 x Tie1 x Wrench5 x Brass NozzleNote:Some 3D printer motherboards have insufficient 5V power supply and may require an external 5V power supply. This is manifested as the difficulty of pushing out the probe, or the logic circuit protection main control restarts during operation. If encountered, it is generally recommended to use a DC‑DC step‑down module to take power from the main power supply.1. +5V and GND should not be connected reversely for a long time, it may be burnt if reversed2. Please try to keep away from strong magnets, motors, fans, and other magnetic components3. Accidentally hitting the probe plastic rod may damage or affect the detection accuracy4. Adjusting or reassembling the set screw of the probe requires thread glue5. When installing the probe, please avoid deformation6. Pulling the aluminum rod forcefully will damage or affect the detection accuracy

As the electronic component of the 3D printer, the sensor can accurately measure the inclination of the bed surface.

As the electronic component of the 3D printer, the sensor can accurately measure the inclination of the bed surface.

The leveling sensor can be used with any kind of bed material, such as glass, wood, metal, etc.

The diameter of brass nozzle include 0.2/0.3/0.4/0.5/0.6mm and the kit is suitable for Ender‑3/CR‑10 3D printer.

With automatic leveling function, the sensor is easier to use and can improve efficiency.

With a simple structure and high accuracy, the 3D printer accessories can bring convenient printing effect.