Premium Marble PLA Filament 1.75mm for 3D Printers - 1kg Spool, Marble White 3D Printing Material - Ideal for Home DIY, Cosplay Props & Artistic Creations

This is an excellent filament depending on what you are using it for. For testing all of my new filaments, I use thing:1023717 to find basic settings like temps and print speeds. What I found, that isn't shown in the photos from other reviewers, is a model with thin vertical walls which have a high number of retractions does not seem to show the glitter effect of the filament. The top and bottom surfaces of my three prints all have a strong glitter effect, but the walls are almost entirely black. I printed out another model that does not have thin walls or a high number of retractions and reproduced what was seen in the other photos. Additionally, this filament is very rigid when compared to some of the other brands of PLA I have printed with (Hatchbox, Zyltech, Prusa, and Atomic) which works well for the applications I intend to use it for.To address the stringing, I printed this filament at 195' and found almost zero stringing present. At higher temperatures any time there was a retraction, the melting glitter would string very badly. The lower temperature is different that what I normally print at, but was required for this filament. My suggestion would be to print a small retraction test such as thing:909901 and adjust your temperature, retraction, and speed (primarily travel speed) settings until your results improve.Finally, the item name containing "Marble Color" is slightly misleading. However, the name on the label only reads as "Shining Black" and does not mention marble anywhere. This is a very good filament at a lower cost when compared to similar products such as Fillamentum's "Vertigo Grey" that can achieve exceptional looking prints if coupled with the correct slicer settings._____________________________________________________________________Printer: Prusa Mk3Slicer: Prusa Slic3rPrint Settings: Stock .10mm settingsFilament Settings: Stock settings with the exception of a print temp of 195'