AmeraLabs Dental model resin DMD-21 LED stands out by its accuracy and 3D printing speed. High resolution surface, maximum dimensional accuracy and stability meet the high demands of model production. Market leading fast curing resin leads to faster model production and lower costs. Primary applications: implant supported and tooth borne fixed restoration models, digital wax-up printing with excellent quality of surface and attractive color, accurate removable dies and base of alveolar model (Willi Geller model), orthodontic models, study models. DMD-21 LED resin produces dimensionally accurate and stable prints fast. Due to its stiffness and a fair amount of hardness it can sustain straight edges and print out even the tiniest features. Supports do not bend during printing, keeping the model in place throughout the whole printing session and giving a higher rate of success with complex prints. Also it exhibits low shrinkage of less than 0.9% so the print will not deform during post-curing stage and will not crack over a long period of time. Material is available in sand color (LAB 78;6;18). Carefully pigmented to get ideal color that expresses the most intricate details. Colour is almost fully opaque. Surface is glossy and hard (90 Shore D). After post-cure it does not feel sticky or tacky and is pleasant to touch. Water absorption is less than 0.2%. This means, that your models will not deform due to moisture or exposure to IPA. DMD-21 is probably the FASTEST curing resin for LCD printers! Designed for most popular MSLA 3D printers using both: color and mono LCD screens. Fast printing enables to increase the throughput of your model production.