Production functions: [Product Name]: LED Cold Light Source UV Curing Lamp [Light source type]: using imported UV LED chips (wavelength 365NM/395NM) [Product features]: Suitable for rapid curing of various UV shadowless adhesives, especially for deep curing of touch screen LOCA water-based adhesives. It has many characteristics such as fast curing speed, strong penetration, no heat, low light attenuation, long service life, low power consumption, and energy saving [Product advantages]: Compared with traditional fluorescent tubes and mercury lamps, LED light sources have very obvious advantages: 1.Ultra long lifespan: The service life is more than 10 times that of traditional lamp machines 2.Cold light source, no thermal radiation, minimal increase in surface temperature of the illuminated object, solving the problem of traditional thermal damage. Especially suitable for LCD edge banding, film printing, etc 3.Low heat generation: can solve the problem of high heat generation in traditional equipment 4. Instantly lit: No preheating required, instantly reaching 100% power UV output 5. The service life is not affected by the number of switches 6. High energy, stable light output, uniform irradiation effect, and improved production efficiency 7. It does not contain mercury and does not produce ozone, making it a safer and more environmentally friendly alternative to traditional light source technology 8. Low energy consumption: The power consumption is only 10% of traditional lamps, which can save 90% of electricity Specification parameters: Bulbs Qty:120 Power consumption:240W Relative luminous efficiency:2400W Energy intensity: 680mW/cm2 Cooling method: aluminum alloy+air cooling Material: Aluminum alloy+High temperature resistant soft silicone Input voltage:AC90-250V Service life: more than 10000h Working temperature:-20℃-40℃ Product weight: 3.2KG Scope of use: Suitable for various UV shadowless adhesives, UV inks, UV green oils, UV coatings, solder joint protection, touch screens, OCA optical adhesives, photosensitive adhesives for flexible plate making, screen printing, UV epoxy resin adhesives, 3D printing photosensitive resin adhesives, UV three proof paints, UV varnish, and more The difference between regular and high-strength versions: 1.Energy intensity of regular version portable UV lamp reaches 500mW/CM2; energy intensity of High intensity version portable UV lamp reaches 900mW/cm2 2.There are only two fans for heat dissipation on regular version; more fans for cooling (more stable quality) on High intensity version 3.The arrangement density of reflective cup bulbs is generally average on regular version; the light bulbs are arranged more tightly, emitting light more evenly (with higher intensity)on High intensity version 4.The switch of regular version is on the power line; Switch of high intensity version is on the light, more convenient 5.The regular version uses 1.25w bulbs; The high intensity version uses 2w bulbs
