HysiPrui 220mm (8.66") Magnetic Build Plate - Round Heated Bed Sticker Surface for FLSUN Q5 Delta 3D Printer | Perfect for ABS, PLA Filament Printing & Rapid Prototyping

Please look for the brand “HysiPrui” to ensure what you got is authentic, otherwise we are unable to guarantee product quality. Color: Black This 220mm build plate works with Flsun Q5 delta 3d printers. It consists of 2 parts. The upper side is a little bit larger than the lower side. Kindly Note: Please cool the heat bed down to around 30ºC and then take off the model. Please Do Not heat it up over 80ºC otherwise the magnet would be easy to broke. Please do not print ABS or PETG as ABS need at least 100ºC If it get “dirty” after you printed, please clean it with a soft cloth and alcohol if necessary. AFTER SALES SERVICE: We provide after sales service for all the products purchased from our store. Just feel free to contact us by email anytime. We will offer a satisfactory solution asap. within 24 hours.

Compatible with 220mm diameter or smaller Bed printers: Flsun Q5 3d printers.

Build plate consists of two parts. Part A stick to the bed. 220mm with 3M glue. Part B is flexible and will stick to Part A with magnet.

Superior Matte quality: Easy to adhere, easy to remove. Flex slightly to pop your print right off. No need any tape or glue. For large print, please use a removal tool to take the model off. Please cool it down to around 30ºC to take off models.

ABS or PETG filament not recommended. To ensure a longer service life, please do not heat it up over 80ºC and do not heat it up over 60ºC for long time.

Easy to clean: A few swipes with a soft cloth and alcohol can quickly clean adhered materials and stray filament residues. This magnetically constructed surface can be reused for multiple thermal cycles.